How do you cover a complete garden set with a furniture cover?
The best way to cover a complete garden set is to first push all chairs tightly against the table and, if possible, store the cushions indoors. Then choose a garden set cover that is both waterproof and breathable, and make sure the dimensions match the entire setup. A high-quality patio furniture cover gives reliable outdoor furniture protection in all seasons.
Place the cover evenly over the set and gently pull it down so all corners and legs are covered. Leave 5 to 20 cm of space from the ground for proper air circulation. Secure the cover by tightening the drawstring and fastening the click-close straps to the set. For extra stability, you can use weights or sandbags to keep the cover tight and prevent it from blowing away. This helps your waterproof garden set cover perform at its best.
Finally, check that no folds or water pools have formed. You can easily avoid this by placing a water shedding pole or a water shedding cushion underneath the cover. That way your table and chair set cover keeps the furniture optimally protected against wind and weather throughout the season.
Why is it important to cover your garden set?
By properly covering your garden set, you protect your furniture against rain, snow, UV radiation and dirt. Without a cover, moisture can penetrate the material, causing wood rot, rust, or mould. Cushions and wooden parts also fade faster in sunlight. Even aluminium and plastic are susceptible to deposits and wear without a protective patio furniture cover.
A high-quality garden furniture cover also saves you hours of spring cleaning. With the right outdoor furniture protection, you extend the lifespan of your garden set by years and keep it looking like new for much longer.
Which cover should you choose for a complete garden set?
For a complete garden set, choose a cover that is both waterproof and breathable. This stops rain getting in while allowing condensation and residual moisture to escape. The most popular options are polyester covers with a breathable PU coating or a TPU layer—ideal when you want a durable, waterproof garden set cover that still ventilates.
Pay close attention to sizing: the cover should be snug enough not to flap, yet allow sufficient ventilation. Also check whether the cover features a drawstring and click-close straps, so it stays put in strong winds. Premium covers often include a water shedding cushion or the option to add one for better drainage.
Discover our 3 best-selling garden set covers
How do you measure a garden set for the right cover?
Follow this short step-by-step guide:
-
Place your garden set in the regular position, with the chairs pushed against the table.
-
Measure the length of the table.
-
Measure the width from backrest to backrest.
-
Measure the height to the highest point, usually the backrest.
-
Include protruding parts such as armrests or table edges.
-
Allow a few centimetres of clearance for a smooth fit and ventilation.
More tips: Read our full measuring guide.
How to cover a complete garden set step by step
Covering your garden set may seem simple, but with the right approach, you extend the life of both your furniture and the cover. Follow these detailed steps to get the most from your patio furniture cover:
-
Prepare your garden set: Push all chairs tightly against the table and remove the cushions if necessary. Store cushions indoors during winter to keep them dry and prevent mould growth.
-
Check the cover: Ensure the cover is clean, dry, and free from tears. A damaged cover can let in rain and dirt, leaving your garden set wet and unprotected.
-
Place the cover correctly: Start at the top: position the cover over the highest point—usually the middle of the table—then pull it evenly down over chairs and table legs.
-
Secure the cover firmly: Use the drawstring and click-close straps to fasten the cover all around. Do not over-tighten; just make sure there are no loose folds that can catch the wind.
-
Prevent water pooling: Place our Water Shedding Poles or Water Shedding Cushions under the cover so rainwater runs off and no puddles remain.
-
Check during wind or bad weather: Regularly ensure the cover is still secure, especially in stormy conditions. Add weights or sandbags at the corners if needed for extra wind resistance.
Common mistakes when covering a garden set
Things often go wrong when using a cover that is either too tight or too loose. A too-tight cover is constantly under tension, increasing the risk of split seams. A too-loose cover flaps in the wind and can collect water in folds, which leads to mould and leaks.
It’s also common to forget to store cushions indoors in time, causing them to become damp and musty. Another mistake is storing the cover while it’s still wet at the end of the season, which encourages mould and reduces the fabric’s protective qualities.
Always choose a patio furniture cover with secure fastening options and sufficient ventilation, so your garden set stays well protected.
Choose a garden set cover from Raffles Covers
Covering your garden set is a simple way to significantly extend the lifespan of your furniture. With a well-fitting, waterproof and breathable cover, you protect your set against rain, UV rays, frost, and dirt—true outdoor furniture protection that pays off quickly.
By choosing the right size, fastening the cover securely and avoiding common mistakes, your garden set will remain in top condition all year round. At Tuinmeubelhoesshop.nl you’ll also find both round garden set covers and rectangular garden set covers.
Invest in a quality brand like Raffles Covers to ensure optimal protection and many years of enjoyment from your garden furniture.