- Customer rating 4.8/5
- Trusted Shops certified
- Ordered before 17:00, shipped the same day
Product information "Raffles Covers Protective Cover for Complete Garden Furniture and Lounge Sets"
Product information "Raffles Covers Protective Cover for Complete Garden Furniture and Lounge Sets"
Raffles Covers Protective Cover for Complete Garden Furniture and Lounge Sets – RMS Series
Protect a complete garden furniture set or lounge set beneath one spacious cover with the Raffles Covers RMS series. The cover is designed for long-term storage throughout autumn and winter, allowing your outdoor furniture to remain protected outside when it is not in use.
The cover helps protect against rain, snow, hail, dirt, fallen leaves, bird droppings, algae and other weather-related damage.
Important: Always remove loose seat cushions, back cushions and other fabric items before fitting the cover. Store them indoors in a clean and dry place.
Two-part cover with a mesh groundsheet
The RMS protective cover consists of a strong upper cover and a breathable mesh groundsheet. Place the complete furniture arrangement on the groundsheet and connect both sections using the zip around the full perimeter.
The weight of the furniture keeps the groundsheet in place. This also helps stabilise the upper cover and reduces the risk of it lifting in windy conditions.
Strong, waterproof and breathable
The upper cover is made from durable 600D Solution Dyed Oxford polyester with a fabric weight of approximately 230 g/m². The fabric is hard-wearing, UV-resistant, frost-resistant, colourfast and PFAS-free.
The inside has a waterproof and breathable TPU coating. The seams are double stitched and finished on the inside with PU tape for additional splash-water protection.
Ventilation to reduce damp and condensation
The mesh groundsheet allows air to enter beneath the cover. Integrated air vents support airflow and help damp air escape.
This combination helps reduce condensation, mould, mildew and musty odours. Cover clean and dry furniture wherever possible and allow the arrangement to air occasionally during prolonged damp weather.
Choose a generous fit
The cover should fit loosely around the complete garden furniture or lounge set. It is better to choose a slightly larger size than a cover that sits tightly against the furniture.
A generous fit improves airflow and reduces strain on the fabric, seams and zip. Measure the full length, width and height before ordering, including projecting backrests, armrests and table tops.
Create suitable water run-off
Where possible, position the backrests of chairs and sofas together near the centre of the arrangement. This creates a raised point beneath the cover so rainwater can run towards the outer edges.
During prolonged rainfall, check that water is not collecting on the cover. Remove accumulated snow during winter as well.
Suitable for
- complete lounge sets
- garden dining sets with a table and chairs
- outdoor dining lounge sets
- modular lounge sets
- corner lounge sets and separate lounge sections
- combinations of sofas, chairs, footstools and tables
How to use the RMS protective cover
- Clean the garden furniture and allow it to dry completely.
- Remove all loose cushions and store them indoors.
- Arrange the furniture in a compact group.
- Position the backrests together for improved water run-off.
- Place the complete arrangement on the mesh groundsheet.
- Lay the upper cover over the furniture.
- Connect both sections using the full-perimeter zip.
- Check that the cover fits loosely and is not under tension.
Key features
- Protective cover for a complete garden furniture or lounge set
- Designed for long-term autumn and winter storage
- 600D Solution Dyed Oxford polyester
- Waterproof and breathable TPU coating
- Double-stitched seams finished with PU tape
- Breathable mesh groundsheet
- Air vents for additional ventilation
- Full-perimeter zip fastening
- UV-resistant, frost-resistant and PFAS-free
- Strong handles for easier fitting and removal
With the Raffles Covers RMS protective cover, you can prepare a complete garden furniture or lounge set for autumn and winter storage. Clean and dry the furniture first, remove all loose cushions and make sure the cover has a generous fit, sufficient ventilation and good water run-off.
Product specifications "Raffles Covers Protective Cover for Complete Garden Furniture and Lounge Sets"
Product specifications "Raffles Covers Protective Cover for Complete Garden Furniture and Lounge Sets"
Technical specifications
| Brand: | Raffles Covers |
| Series: | Raffles Multi Set – RMS series |
| Product type: | Protective cover for a complete garden furniture or lounge set |
| Suitable for: | Complete garden furniture sets, lounge sets, outdoor dining lounge sets, modular lounge sets and combinations of sofas, chairs, tables and footstools |
| Shape: | Square design for covering several items of garden furniture together |
| Available sizes: | 200 x 200 cm and 250 x 250 cm |
| Extra clearance required: | Yes, choose a generous size so the cover fits loosely around the furniture arrangement |
| Fit advice: | The cover should not fit tightly around the furniture. Additional space improves ventilation and reduces tension on the fabric, seams and zip |
| Construction: | Two-part system consisting of an upper cover and a separate mesh groundsheet |
| Upper cover material: | 600D Premier Solution Dyed Oxford polyester with TPU coating |
| Groundsheet material: | Breathable mesh fabric with an open structure for airflow from underneath |
| Fabric weight: | Approximately 230 g/m² |
| Water protection: | Waterproof polyester fabric with a waterproof TPU coating and splash-resistant sealed seams |
| Breathable: | Yes, through the breathable coating, mesh groundsheet and ventilation openings |
| Air vents: | Yes, covered ventilation openings for improved airflow and reduced condensation |
| Airflow from underneath: | Yes, the mesh groundsheet allows air to enter beneath the cover and helps prevent the material from continuously resting against the furniture |
| Solution Dyed: | Yes, fully coloured polyester fibres for long-lasting colour retention |
| Colour fastness: | Rated 5 out of 5 for excellent colour fastness |
| UV-resistant: | Yes |
| Frost-resistant: | Yes |
| Double-stitched seams: | Yes, for additional strength and durability |
| Tape-sealed seams: | Yes, finished on the inside with PU tape for additional splash-water protection |
| Fastening system: | All-round zip connecting the upper cover to the mesh groundsheet |
| Protection against lifting: | The weight of the garden furniture holds the groundsheet in place while the upper cover is zipped to it around the full perimeter |
| Drawstring: | No, not required due to the groundsheet and all-round zip fastening |
| Click-close straps: | No, not required due to the two-part fastening system |
| Handles: | Yes, strong handles for positioning, straightening and removing the upper cover |
| Low-noise fabric: | Yes, the strong Oxford polyester rustles and flaps less than thin, lightweight covers |
| Water run-off: | Position the backrests together near the centre of the arrangement to create a raised point and suitable slope |
| Prevention of water pockets: | Ensure sufficient slope and regularly check that rainwater is not collecting on flat areas of the cover |
| Protection for sharp corners: | Cover sharp or projecting furniture parts so they do not press directly against the fabric |
| Fitting: | Due to the large dimensions, fitting and removal by two people is recommended |
| Cushion storage: | Store loose seat and back cushions indoors during prolonged damp weather and throughout winter wherever possible |
| PFAS-free: | Yes |
| Seasonal use: | Suitable for long-term outdoor protection, particularly during autumn and winter |
RMS series sizes
| Series / model | Cover size | Recommended use |
|---|---|---|
| (D-)RMS200 | 200 x 200 cm | Suitable for compact to medium-sized garden furniture and lounge sets |
| (D-)RMS250 | 250 x 250 cm | Suitable for larger garden furniture sets, lounge sets and modular furniture arrangements |
Please note: Always measure the complete furniture arrangement after positioning the items compactly. Allow for projecting backrests, armrests and table tops. When in doubt, choose the larger size.
"Raffles Covers Protective Cover for Complete Garden Furniture and Lounge Sets" reviews