Raffles Covers shaped lounge sofa cover
- Customer rating 4.8/5
- Trusted Shops certified
- Ordered before 17:00, shipped the same day
Product information "Raffles Covers shaped lounge sofa cover"
Product information "Raffles Covers shaped lounge sofa cover"
Raffles Covers shaped lounge sofa covers
With the RLBshaped series lounge sofa covers from Raffles Covers, you can protect your lounge sofa with high backrest and lower armrests all year round against rain, dirt, green deposits and sunlight. Whether your sofa is on the patio, balcony, under a canopy or free-standing in the garden: your lounge set will stay clean, dry and ready for use at any time.
The RLBshaped series has been specially developed for sloping lounge sofas, where the backrest is higher than the armrests. The cover follows this shape: high at the back, low at the front. There are models for lounge sofas from 175 × 100 cm up to 250 × 100 cm, with a height of approx. 85 cm (back) and 65 cm (front). No extra clearance is needed for these models.
High-quality material for 4-season protection
Every cover in the RLBshaped series is made from 600D Solution Dyed Oxford polyester (approx. 230 g/m²) with a durable, breathable TPU coating on the inside. This premium fabric is waterproof, UV-, frost- and winter-resistant, solution dyed for excellent colour fastness and PFAS-free.
The double-stitched seams are taped on the inside with PU tape, making them extra strong and showerproof, even during prolonged rain or unsettled weather.
Breathable and condensation-reducing
An RLBshaped cover is not only strong, but also breathable. The fabric has a breathable inner layer and integrated Airvents (ventilation openings) that provide additional air circulation under the cover.
- Reduces condensation as much as possible
- Helps prevent mould and mildew on cushions and upholstery
- Helps prevent rust and corrosion on metal parts of your lounge sofa
Includes Water Shedding Cushion (RWSC)
With every RLBshaped cover you receive a free Water Shedding Cushion (RWSC). Depending on the model, this is, for example, an RWSC8060 for shorter sofas or an RWSC16060 for longer lounge sofas. Place this inflatable cushion under the cover to create a high point so that rainwater runs easily off the cover instead of forming puddles.
Secure, wind-resistant fit
The RLBshaped covers are designed to fit snugly yet practically around your lounge sofa. The sloping cut (approx. 85/65 cm high, back/front) follows the contours of sofas with a high back and lower armrests, so the cover flaps less in the wind.
For a safe and wind-resistant attachment, the covers are standard equipped with:
- Drawcord in the hem with stopper(s) for a close-fitting bottom edge
- Click-Close straps, tension straps that you fasten around a leg or frame to prevent lifting
- Sturdy handles for easy fitting and removal
- Spacious storage bag to store the cover neatly when not in use
Is your lounge sofa very exposed and windy, for example on a roof terrace or by the water? Combine the cover with accessories such as sandbags (RSBAG), bungee cords (RHOOK), bungee balls or clips (RCLIP), so the cover stays firmly in place even in strong winds and storms.
The covers are suitable for lounge sofas made of, among others, wicker, aluminium, steel, plastic or wood. Is your sofa the same height all round (back and armrests equally high)? Then a straight model from the RLB series is often more suitable.
Measuring & usage tips for shaped lounge sofa covers
- Always measure your lounge sofa on the outside (outside armrest to outside armrest)
- Measure the depth from the front of the seat cushion to the back of the backrest or to the back legs
- Measure the height: from the ground to the highest point of the backrest (rear) and to the front of the arm- or backrest (front)
- Choose an RLBshaped cover with the same size as your sofa; extra clearance is not required
- Always leave 2–15 cm free at the bottom for ventilation
- Place the supplied Water Shedding Cushion under the cover to prevent water pooling
- Ventilate your lounge sofa regularly in dry weather by temporarily removing the cover
Cushions & seasonal use
- Summer: cushions can often remain under the cover, provided you ventilate regularly and check for moisture
- Autumn & winter: always store cushions dry indoors for the best lifespan
With a Raffles Covers shaped lounge sofa cover (RLBshaped series), you give your high-back lounge sofa professional protection: clean, dry and ready for use, season after season.
Frequently asked questions
How do I fit the cover over a shaped lounge sofa?
The cover for the shaped model is specially designed for lounge sofas with a high backrest and lower armrests. Pull the cover from top to bottom over the sofa, starting from the highest side. The drawstring or elasticated hem at the bottom ensures a secure fastening.
How do I measure a shaped lounge sofa?
Measure the width, depth, and height at the highest side of the sofa. Also note the height at the lowest side. Use these measurements in combination with the size guide on the product page to choose the correct cover.
Is the material resistant to all weather conditions?
Yes, the covers are made from waterproof and UV-resistant polyester that is resistant to rain, wind, sun, and frost. The material lasts for many years and retains its quality even with intensive outdoor use.
Product specifications "Raffles Covers shaped lounge sofa cover"
Product specifications "Raffles Covers shaped lounge sofa cover"
Specifications Raffles Covers RLBshaped Series – high-back lounge sofa covers
| Brand: | Raffles Covers |
| Product type: | Protective cover / garden furniture cover for high-back lounge sofa, lounge couch or garden bench |
| Shape: | Rectangular, sloping model (shaped, back higher than armrests) |
| Available sizes: | 175 × 100 cm up to 250 × 100 cm (height approx. 85/65 cm, back/front) |
| Clearance required: | No extra clearance required, cover fits directly |
| Material: | 600D Solution Dyed Oxford polyester with breathable, water-repellent TPU coating |
| Fabric weight: | approx. 230 g/m² |
| Colour fastness: | Score 5 out of 5, highly UV-resistant |
| Breathable: | Yes, breathable material with coating |
| Airvents (ventilation openings): | Yes, for better air circulation and reduced condensation |
| Solution Dyed: | Yes, solution-dyed fibres for long-lasting colour retention |
| Drawstring in hem: | Yes, with stoppers for a snug fit around the lounge sofa |
| Click-close strap(s): | Yes, adjustable straps with click closure to prevent blowing away |
| Double-stitched seams: | Yes, for extra strength |
| Taped seams: | Yes, taped on the inside (splashproof) |
| Handles: | Yes, for easy putting on and taking off |
| Storage bag: | Yes, spacious storage bag included |
| Free Water Shedding Cushion (RWSC): | Yes, RWSC16060 included with all models |
| PFAS-free: | Yes |
| Warranty: | 1 year |
| Rating: | 8.5 / 10 |
Sizes & item numbers RLBshaped Series
| Item number | Cover dimensions |
|---|---|
| RLB175shaped | 175 × 100 cm – height 85/65 cm (back/front) |
| RLB195shaped | 195 × 100 cm – height 85/65 cm (back/front) |
| RLB215shaped | 215 × 100 cm – height 85/65 cm (back/front) |
| RLB230shaped | 230 × 100 cm – height 85/65 cm (back/front) |
| RLB250shaped | 250 × 100 cm – height 85/65 cm (back/front) |
"Raffles Covers shaped lounge sofa cover" reviews
£59.50
Prices incl. VAT